How to Upscale a Fabulous Fall Wreath

Time to get out your old wreaths. What do you find? You wonderful wreath has missing flowers, fruits and ribbons.

That is exactly what happens to me every time, because the glue loosens over time. Plus the wreath could use a little sprucing up.

Well, let's take a look at what I have done.

50 Inspirational Sea Shell Projects

Here are some great projects that are easy for your decor.

Red, White and Blue Deco Mesh Wreath Tutorial Part 2

When starting the second layer of ruffles, just choose a twist and un-do it, making sure the first ruffle stays in place, it will.
Lay your next ruffle right down on top of the first, choosing a contrasting color and re-secure the twist with a couple of turns…..not by the balls remember)))
Because of the number of twists, working around the wreath in a red, white, blue pattern didn’t necessarily come out evenly…..at some point we had to chose a different color.

This is our wreath with three layers of ruffles on the outer and inner rings. Nice)))
You may be wondering why we went around the wreath three times when we could have just held three ruffles in the hand and secured in the twist one time and been done with it. And you could do that, but it takes extra hands!
Also when we finished the first layer…..it looked like the silver balls on the ends of the twists were going to stick out of the wreath too far…..but after the third layer was added, they seem just right.

There are so many options to use once you’ve completed the base wreath. The base wreath looks great without anything else actually…..or you could add some sprays…..a sign…..glittered words…a bow with some tails.
We chose to add some Royal Blue and Red Polka Dot (This ribbon is sold out, but you can use other styles of patriotic ribbon.) wire edge ribbon. This ribbon is a very nice royal blue polished cotton fabric with red glittered polka dots on one side and red metallic on the bottom. It’s 2.5″ and 10 yards in length. You’ll find this ribbon in our Polka Dot section. Your choice of ribbon or ribbons can absolutely make the wreath. Sometimes it far better to use a more modest style of mesh or other material and use more expensive ribbons for a finishing touch.

We measured the depth of the wreath to determine how long we needed to cut our ribbon strips. If the depth of the wreath measure 7-8″ you need ribbon strips at least 14″ since they will be pinched in the middle and attached to the strips. You want the tips of the ribbons to stick out beyond the mesh a bit so they will be more visible.
It’s always best to try the length of ribbon you think you’ll need before cutting it.

One the ribbon strips were cut, we folded the ribbon in half and made a cut across the folded side of the ribbon.

 Pinch the ribbon in the center.

 Continue adding ribbon. For this wreath, we added ribbon to each twist, but you don’t necessarily have to. We also considered using two types of ribbon but elected to just use this one because it showed up so well.

 Once you’re wreath is finished, hang it up and take a look. Fluff out the tips of the ribbon strips, cut any loose strings. Actually to have 54 pieces of mesh cut, we had practically no strings to cut which is pretty amazing. The more you handle Deco Poly Mesh, it will ravel, but this project went great with next to no raveling.
I love it…..love this style. The base wreath came out very regular without gaps or holes. No wire frame showed at all and the Pencil Wreath with Balls added a little more sparkle which will be great for Memorial Day or the Fourth of July. Hmmmmm…..and we can lose the star and add something that screams Hotty Toddy for our Rebel fans )))
Remember……no twisting by the balls……lol (sorry….it’s the end of the day…..I’m tired…..and ready to call this one done! )

Until we meet again,

Claudia

Stop Bullying in the Work Place, Now!

 

Red, White and Blue Deco Mesh Wreath Tutorial Part 1

I want to make this wreath!

Isn't it spectacular!

Here is how to make this magnificent wreath by Trendy Tree Link
It is a great website to order fun craft items.

We chose to make our wreath using a Pencil Ball Wreath instead of just a plain Pencil Wreath to add a bit more glitz. We were undecided about which color to use and opted for the Silver Pencil Ball Wreath.  The Pencil Ball wreaths cost a little more, but add a little extra with the shiny balls on the tips of the twists. This wreath is 24″, same as other Pencil Wreaths. The actual metal frame is 15″ at it’s widest portion, but yields a 24″ wreath or larger depending on the type mesh and type of method used to make the wreath. (This wreath can be made with any 24″ Work Wreath or Pencil Wreath.)
The Deco Poly Mesh used was the Wide Foil style in the 10″ width. We used Red, Royal Blue and White with Silver Foil. The 10″ rolls have 10 yards and sell for $6.99. I thought when we first started making the Ruffle Wreath that the overall finished wreath would be smaller than the typical wreath made with 21″ wide mesh….but it measured a good 28″ in width and height when done.
The only real difference between our wreath and the Craig Bachman Imports wreath in the video, was on their wreath they went around the inner and outer rings once with a “ruffle” and then did the inner ring a second time to add fullness.
We decided to count to see how many “ruffles” we could get from each roll so that we would use up the rolls instead of having short remnant left over.
We counted the twists on the wreath which were 18. The ruffles were to be cut in 20″ lengths, so each 10 yard roll of mesh should have yielded exactly 18 ruffles of mesh. Thus we would have 54 ruffles….18 of each color. So we decided to give our wreath three layers of ruffles, alternating the colors.
(Note – since this first wreath, we have started making ruffles only 10″ in length which works very well and takes less mesh.)

 The mesh was spread out (all three colors layered on top of each other) and measured on the cutting table. Thanks to Julie Siomacco. Saw her do this in her free tutorial this weekend. Isn’t it funny how we can see someone do something so simple…..and think….gosh, why didn’t I think of that!

 We cut the rolls 20″ in length and just laid them to the side.

 To make the ruffle just start at one end of the 20″ cut length, flatten it out as best you can. It really helps to have another person, or just lay your scissors or something down on the opposite end of the mesh to hold it flat while you pinch pleat right up the center of the strip.

 Just keep scrunching up the middle and keep it snug in your finger.

 Hold it pinched in your fingers until you place it between the twists of the Pencil Ball Wreath

Just pick a place to start on the Pencil Ball Wreath and lay the pinched ruffle inside the twists and secure it with a couple of turns.
When working with the Pencil Ball Wreaths, always use the twist stem and not the balls for twisting. We had a couple to pull loose while we were working with the wreath, but they slipped back on without any problem. But, hindsight…..don’t twist by the balls…..well….I guess that’s a good practice to apply….whatever the occasion……. Anyway…..back to the wreath)))

  Just alternate your colors and continue working around the wreath.

Crafty Weekend Continues

I found a bunch of pine cones so I decided to make a wreath